NEZHA MAKER / Lighting collection / Wall / Twin alabaster sconce 2 heads
Detail views
Specifications
| Material · Body | Spanish alabaster + solid brass |
|---|---|
| Light · Socket | G9 |
| Light · Dimming | TRIAC dimmable |
| Size | 480 × 220 mm |
| Packing | 0.06 CBM / 4.4 kg |
| MOQ | 1 |
| Base lead time | 18 days |
Downloads
—
Wall · Wall light
Twin alabaster sconce 2 heads
Up and down, on separate circuits.
Made to measure
480 × 220 mm · 2 heads · G9 · MOQ 1 · 18 days — Every figure below can be changed.
This model is produced to order, not pulled from stock. Size, head count, material, finish and voltage can all be changed; the photos show one configuration.
- Diameter & drop
- Head count
- Alabaster tone
- Brass finish
- Voltage & control
Tell us the size, quantity and destination — we reply with feasibility, a drawing and the lead time.
Details that matter
Two 200 mm alabaster shades on a 480 mm brass backplate, one facing up and one down, wired to separate terminals.
- 01
Two circuits
Up and down are independent: run both on one switch, or split them so the down light reads as a night light and the up light as ambient.
- 02
Shade geometry
The shades are open cones, not domes, so the wall above and below gets a defined scallop rather than a flat wash.
- 03
Rigging
4.4 kg in a 0.06 cbm carton. Backplate takes a 90 mm box and covers a 100 mm plaster cut-out.