NEZHA MAKER / Lighting collection / Stone & Plaster / Plaster ceiling downlight 280 / 100
Detail views
Specifications
| Dimensions | 280 x 100 x 40 mm |
|---|---|
| Material | Cast gypsum plaster |
| Finish | Matt gypsum, paintable |
| Installation | Cut-out 285 x 105 mm |
| Light · Socket | 55 mm module |
| Packing | 0.009 CBM / 0.51 kg |
| MOQ | 1 |
| Base lead time | 20 days |
Downloads
—
Stone & Plaster · Ceiling
Plaster ceiling downlight 280 / 100
Recessed rectangular trim, cut-out 285 x 105 mm, 55 mm module.
Made to measure
280 × 40 mm · 1 head · 55 mm module · MOQ 1 · 20 days — Every figure below can be changed.
This model is produced to order, not pulled from stock. Size, head count, material, finish and voltage can all be changed; the photos show one configuration.
- Diameter & drop
- Head count
- Alabaster tone
- Brass finish
- Voltage & control
Tell us the size, quantity and destination — we reply with feasibility, a drawing and the lead time.
Details that matter
A 280 x 100 mm, 40 mm deep cast-plaster ceiling body that sits flush in the board, with a thin flange that is filled and painted into the ceiling.
- 01
Cut-out and flush trim
Cut the ceiling or soffit at 285 x 105 mm; the plaster flange laps the opening by about 5 mm all round and is filled and painted with the surrounding board, so no frame line shows.
- 02
Lamp and service
Takes a 55 mm module. The module is supplied separately and its exact type is confirmed with the factory at order; it clips out from below for service.