NEZHA MAKER / Lighting collection / Stone & Plaster / Round plaster ceiling downlight Ø125
Detail views
Specifications
| Dimensions | Ø125 x 60 mm |
|---|---|
| Material | Cast gypsum plaster |
| Finish | Matt gypsum, paintable |
| Light · Socket | Not specified in supplier sheet |
| Packing | 0.0075 CBM / 0.43 kg |
| MOQ | 1 |
| Base lead time | 20 days |
Downloads
—
Stone & Plaster · Ceiling
Round plaster ceiling downlight Ø125
Recessed round trim, cut-out to match on site, lamp to confirm.
Made to measure
Ø125 × H60 mm · 1 head · MOQ 1 · 20 days — Every figure below can be changed.
This model is produced to order, not pulled from stock. Size, head count, material, finish and voltage can all be changed; the photos show one configuration.
- Diameter & drop
- Head count
- Alabaster tone
- Brass finish
- Voltage & control
Tell us the size, quantity and destination — we reply with feasibility, a drawing and the lead time.
Details that matter
A Ø125 mm, 60 mm deep cast-plaster ceiling body that sits flush in the board, with a thin flange that is filled and painted into the ceiling.
- 01
Cut-out and flush trim
The supplier sheet gives no cut-out for this model, so the opening is set from the trim on site; the flange laps the opening by about 5 mm and is filled and painted with the surrounding board.
- 02
Lamp and service
The supplier sheet does not specify a lamp for this body; the lamp type and wattage are confirmed at order. The lamp is reached from below without removing the trim.