NEZHA MAKER / Lighting collection / Stone & Plaster / Plaster corner light 185 / 225
Detail views
Specifications
| Material | Cast gypsum plaster |
|---|---|
| Finish | Matt gypsum, paintable |
| Light · Socket | LED |
| Light · Dimming | TRIAC dimmable |
| Size | Ø185 × H225 mm |
| Packing | 0.0462 CBM / 4.81 kg |
| MOQ | 1 |
| Base lead time | 20 days |
Downloads
—
Stone & Plaster · Wall light
Plaster corner light 185 / 225
A round section for a 90-degree wall corner.
Made to measure
Ø185 × H225 mm · 1 head · LED · MOQ 1 · 20 days — Every figure below can be changed.
This model is produced to order, not pulled from stock. Size, head count, material, finish and voltage can all be changed; the photos show one configuration.
- Diameter & drop
- Head count
- Alabaster tone
- Brass finish
- Voltage & control
Tell us the size, quantity and destination — we reply with feasibility, a drawing and the lead time.
Details that matter
A 185 x 185 x 225 mm cast-plaster corner body with the body is turned round and the opening follows the curve, closed by two flat back faces at 90 degrees.
- 01
Corner geometry
Both back faces are flat and meet at exactly 90 degrees, so the body beds into the corner and the outer radius can be skimmed into the wall.
- 02
Lamp and access
LED 5 W behind the opening. The lamp holder sits on a bracket that slides out through the front, so re-lamping never disturbs the plaster joint.