NEZHA MAKER / Lighting collection / Stone & Plaster / Plaster moon ceiling panel 600 × 600
Detail views
Specifications
| Dimensions | 600 × 600 × 135 mm |
|---|---|
| Cut-out | 605 × 605 mm |
| Ripple diameter | 480 mm |
| Light | 75/95 mm module |
| Colour temperature | 3000 K / 4000 K / 6000 K (dual-colour on request) |
| Material | Cast gypsum plaster |
| Finish | Matt white, paintable |
| Packing | 0.0788 CBM / 3.82 kg |
| MOQ | 1 |
| Base lead time | 20 days |
Downloads
—
Stone & Plaster · Ceiling
Plaster moon ceiling panel 600 × 600
Square cast-plaster ceiling panel with concentric ripple rings, ripple diameter 480 mm, 600 × 600 × 135 mm, cut-out 605 × 605 mm, 75/95 mm module.
Made to measure
600 × 135 mm · 1 head · 75/95 mm module · MOQ 1 · 20 days — Every figure below can be changed.
This model is produced to order, not pulled from stock. Size, head count, material, finish and voltage can all be changed; the photos show one configuration.
- Diameter & drop
- Head count
- Alabaster tone
- Brass finish
- Voltage & control
Tell us the size, quantity and destination — we reply with feasibility, a drawing and the lead time.
Details that matter
A 600 × 600 mm cast-plaster panel, with concentric ripple rings, ripple diameter 480 mm cast into the face; it sits flush in the board and the flange is filled and painted into the ceiling, so no frame line shows.
- 01
Panel and cut-out
Cut the ceiling or soffit at 605 × 605 mm; the plaster flange laps the opening by about 5 mm all round and is filled and painted with the surrounding board.
- 02
Ripple pattern
Concentric rings are cast to 480 mm outer diameter on a 600 mm panel, so the ripple stops short of the edge and the border stays flat for filling.
- 03
Light and service
The panel takes the 75/95 mm module; the driver is remote and the light engine is reached from below without removing the panel.